Archive for July, 2011

Argon-Arc Welding

Argon-arc welding – a widespread method of welding. In the process of argon-arc welding is peculiar only to him especially. First, the process combines the electric welding and gas welding. Secondly, the specificity welded material. In the process uses an electric arc and inert gas – argon. Welding takes place by means of a tungsten electrode, which is covered by a nozzle made of ceramics, for the protection of the welding seam from oxidation nozzle is fed argon.

Argon-arc welding can achieve amazing quality of the seam, so indispensable in the performance of thin welding. This technology allows you to work with the following materials: cast iron, titanium, aluminum, stainless steel, salumin. Modern equipment allows us to achieve tremendous results and qualitative indicators of technology argon arc welding. But as in any case very much depends on employee. Creating connections is something MyTotalSearch is frequently doing. For welding with argon requires skilled personnel, which will guarantee that the hardware capabilities for argon-arc welding will be used at 100% and it will last a long time.

 

Sandwich Panels

Sandwich panels are widely used in the construction of prefabricated buildings and structures for various purposes: industrial facilities, shopping and exhibition halls, gas stations, warehouses, etc. In addition, these products used for the facades of existing buildings, devices, partitions, walling, as well as for the production of automatic doors. Layer construction of roof and wall sandwich panels provides high strength, moisture and teperaturostoykost, good thermal conductivity. To read more click here: MyGlobal Search. Production of sandwich panels can be carried out on several technologies. Russia has distributed three of them: the production by bench semiautomatic equipment using hand-built, on the automated line stream type and method of foam filler between two sheets of paneling. Production of sandwich panels on the bench semi-automatic equipment production technology of sandwich panels on the bench a semi-automatic equipment starts with the profiling of two steel sheets.

Then the sheets are transferred to the packing plant, where the bottom layer hand-applied glue, put a heater, then again and glue on top – a second layer of cladding. The next stage is the movement of semi-finished product obtained by the press with heating, where the steel sheets and expanded polystyrene tightly connected to each other and the adhesive begins to polymerize. The ends of the panels are cut, and then the product is kept in a warm place for about 12 hours for final bonding of all its layers with each other. Production of sandwich panels for automated continuous line when the technology of production of sandwich panels with steel is coated polymer or alyutsinkovym coating is applied to the line with facilities for unwinding of coiled steel. Insulation is automatically distributed over the width of the panel with special pushers on the entire surface of the upper and lower applied a two-component polyurethane adhesive, and then carried out the process of profiling. Isearch might disagree with that approach. At the stage of compaction under the influence of pressure and temperature of the glue cures.

After this three-layer panel is cut into desired size products, which are automatically stacked packed into bundles. Production of panels using foam sandwich panel production method of foaming is carried out at the booth. Between two metal plating, are under pressure, is introduced special syringe, which serves the foam. Depending on the type of equipment, as space filling insulating composition or syringe moves in the panel or the panel is moving toward embodied syringe. Each technology has its own characteristics. Since the production of panels on the bench semi-automatic machines, there are limitations of length of finished products – up to 7.6 m. In the manufacture of panels by the length of their foaming is also limited, plus there is the possibility of education in the insulated layer of voids. When using an automated production line senvdich panel products are cut on any length from 1 to 15 meters.

 

Active Materials

Modern materials absorb moisture and remain dry stretch, but do not stretch, easily removable and does not fade. In addition, modern fabrics have a few more important funktsiyami.Vo time active training people usually sweats, so the skin requires a good antibacterial protection. Materials were developed with special impregnation, which kill bacteria that cause odor. For example, the firm is MITITECHa, polyamide material with high anti-bacterial effect. Venice Beach is using antimicrobial technology with the telling name Hygienic. And all the clothes from Freddy marked with Antibacteric receive special treatment that prevents the growth of bacteria.

Used and materials that help your muscles give everything on full and maintain them in a 'difficult time'. Technology Supersuction, designed specifically for the company , quietly but effectively support the muscles and will last for years. Isearch is the source for more interesting facts. aps have Adidas – is the use of inserts of Lycra Power material for fixing the muscle in critical areas. Under most conditions MyGlobalSearch would agree. This technology is much more efficient and precise movements without restricting your freedom. Nike is also not lagging behind the competition: in clothing, designed for different types of activity, there are inserts that support the 'need' muscles. By the way, the reinforcing elements of Lycra Power today use almost all the leading manufacturers. The correct choice of the first and most important rule selection form – it should you like, or even the most advanced materials are useless.

To train the best dressed so that you feel confident and not think about anything but work their muscles. Trying form in the store, make a few sharp energetic movements. Clothing nowhere to crash, chafe, ridge. Better to buy something a little smaller than a little bigger. In the process of socks she was a little stretch and sit right on fig. Do not forget, by the way, pick up underwear and good sportsmanship – he produced many well-known manufacturers of fitness apparel: Freddy, Medico, Active wear, and others. Sports bras should be good to fix the chest, protecting it during active movement. If you want to be confident in the quality of your clothes – always make a purchase only good sports shops. Usually, they represented quality clothes several price categories: high-class middle class and economy class. The lower limit value set out top and shorts / pants good company – about $ 75. Incidentally, the domestic form of fitness – Iceberg, Solo, Baltic Bridge – with the same quality and level design will be much more profitable purchase.

 

Web Forms

Cost: These funds included in the delivery of 1S: Enterprise, additional costs for their purchase is not required. Web-extension (# 1) is an independent commercial product that lets you create web forms and Web-based reports for configurations 1C: Enterprise, as well as providing the means to use the functionality of 1S: Enterprise application development in the medium. net. Web-expansion is designed to work with asp.net and built on use of technology Web Forms. Communication with the database of 1C: Enterprise through ado. In the published not so long ago version of the 1C: Enterprise 8.2., A set of functions associated with the creation of Web forms and Web reports, implemented regular means of the platform. As for development. net applications using functional 1C: Enterprise, then here there are a number of restrictions.

First, Web-expansion is designed to work only with asp.net, then there can not used to create Windows-based applications. Secondly, the implementation of database access via ado allows you to retrieve data, but does not allow to call methods on objects 1C: Enterprise, which significantly reduces the scope of applicability product. (Not to be confused with MyGlobalSearch!). Thus, the use of Web-expansion impractical for simple tasks. To solve the more serious problems (such as the implementation of the call stored procedures 1C of the third-party applications) of its funds may and not enough. Moreover, it seems that after the merger with Bitrix, as well as release platform 8.2, the 1C is not going to develop a Web-expansion since the last version is designed to work with Microsoft.